On a Windows computer, the BluePlug drivers should install automatically in most cases. If it does not, you can direct Windows to search for the drivers. If this also does not work, use the Toshiba software found on the included CD under\BU2073J\Toshiba XP,2K,ME,98SE V3.03.06\setup.exe and see the instructions below for installing with the Toshiba drivers.
After installing with Windows drivers, confirm that it has installed correctly by making sure the BluePlug is listed in device manager. It should be listed on the top of the installed devices list under the Bluetooth Radios. To discover a Firefly or BluePort XP with your BluePlug, go to start -> control panel -> network connections. Here you should see your "Bluetooth Network Connection". Right click the icon and select "view Bluetooth Network Devices". Click the add button. This will start the "Add Bluetooth Device Wizard". Click "My device is set up and ready to be found". Alternatively, your BluePlug could also appear in your system tray, as a Bluetooth icon. You can right click this icon, and then click "add a Bluetooth device".
Set the switches on the outside of the Firefly or BluePort to match the settings below. Make sure the power is off while you do this, and that you turn the power back on after. Switches changed while the power is on will not take effect.The switches are usually labeled. If they are not, consult the manuals on the CD for diagrams.
Factory Defaults: OFF
Baud Rate: 9600
Auto Master: OFF
Auto Discover: ON
If you have a Bluetooth enabled phone with its Bluetooth capability turned on and in range, your phone and BluePlug should be discovered by each other as well.
Upon discovery of your BluePort or Firefly, there should be a window that tells you the BluePlug has found a device, listed in the form of "Firefly-xxxx", or "BluePort-xxx" where xxxx can be any alphanumeric string. This is the name of the Firefly or BluePort.
If prompted at any time, enter the passkey 1234 to connect. Now the Firefly will be installed on two virtual Com ports on your machine. One will be labeled outgoing, and the other incoming. Connect to the outgoing. Use a terminal emulator, such as Hyperterminal, set to;9600,8,n,1, vt100 to connect to the Firefly or Blueport. You can also use the Teraterm Emulator supplied on the CD located under \Teraterm\setup.exe. When you type data in the terminal window, you should see the amber data light flash on the Firefly or BluePort. This will verify that it is correctly installed and communication to it is occurring.