EtherNet/IP, PROFINET, or both?

Dec 14, 2021 8:00:00 PM / by Rick Rockershousen posted in Ethernet TCP/IP, industrial networking, PROFIBUS, PROFINET

0 Comments

Ask our Engineers Anything:

Should I implement EtherNet/IP, PROFINET, or both in my device, and how?

EtherNet/IP and PROFINET are two protocols that utilize and add value to standard ethernet technology.

Speed is often mentioned as a key benefit of PROFINET, while interoperability often goes into the EtherNet/IP column. Yet when it comes to one over the other, it's not so black and white. For product design and development, you may want to hedge your bets and support both.

The global industrial ethernet market is growing at 7.2% CAGR and expected to surpass $15 billion by 2027. Looking at market share, PROFINET is overall the leading Industrial Ethernet protocol worldwide, yet EtherNet/IP (EIP) is becoming more popular as an industrial networking standard.


Source: Global Industrial Ethernet Market, published by KBV research.

Since both PROFINET and EtherNet/IP are  widely adopted, this article will present some background information and offer three primary options for including them into your product design.

About EtherNet/IP (EIP) and PROFINET

With backing by Wisconsin-based, North American giant Rockwell Automation and others, EtherNet/IP has a strong presence in the US and Canada. Rockwell Automation has been in the game for years through ongoing development of their control networks.

PROFINET is very strong in Europe, with backing by Siemens and others. As mentioned, it is strong worldwide, including substantial market share in North America. While PROFINET is based on the PROFIBUS standard, it is not simply PROFIBUS over Ethernet. PROFINET is generally faster overall than EtherNet/IP, but it can require special hardware for some applications.

Open standards with governance

Part of the appeal of EtherNet/IP and PROFINET is that both are open standards, yet both also have governing bodies in place to guide development and ensure certain requirements are met.

PROFIBUS and PROFINET International (PI)

_pi-logo_d2d02c70cb

Known as PI for short, this organization has about 1,700 member companies globally and offers PROFIBUS and PROFINET competence centers, training centers, test labs and certifications, and various working groups and technical committees.

Visit the PI website to learn more

Open DeviceNet Vendors Association (ODVA)

ODVA-logo-r

Known as ODVA, the members of this global association are leading industrial automation companies. The stated mission of ODVA is to advance open, interoperable industrial automation technologies. ODVA's network protocol, the Common Industrial Protocol or CIP, is core to its mission, supporting the adoption of commercial-off-the-shelf products and standard internet and ethernet technologies.

Visit the ODVA website to learn more.

Note that Grid Connect is both a PI member and ODVA member.

 

EtherNet/IP and PROFINET considerations

As mentioned already, EIP and PROFINET are both open source for greater interoperability and more options to use off-the-shelf components. Following are important considerations when assessing these protocols for your product development plans.

Certification requirements

An important point to remember when adding one of these protocols to a device is that the device must be certified by the appropriate body, ODVA or PI, in order to be sold on the open market as an EtherNet/IP or PROFINET capable device.

This involves testing of the device in a certified lab, which runs a standard set of conformance tests on the product. There are costs associated with this testing and manufacturers should consult with the appropriate body to understand the timing, costs, and documentation needed.

Three implementation options

Device manufacturers looking to add industrial protocols to their device have three main options for getting this done.

1. Do-It-Yourself (DIY)

You can develop or buy a PROFINET or EtherNet/IP stack and run it on the native microcontroller of the device.

The DIY approach makes sense when the projected sales volumes justify the additional development expense. If the device manufacturer has a willing customer who has time to wait for the R&D and will buy sufficient quantities, then this approach makes sense.

Adding a new protocol stack to a device’s existing software base may require making hardware changes to the device as well. For example, adding a protocol stack to the software will increase the load on resources such as RAM and Flash memory. If the load is too much, then additional RAM and/or Flash will have to be added to the microcontroller PCB. Another reason for needing to change the PCB is if an Ethernet RJ45 Connector needs to be added to connect the device to the PROFINET or EtherNet/IP network.

When you consider this plus the learning curve for understanding the protocol plus certification costs, the DIY approach is not for the faint of heart. The trade-offs are lower Bill of Material (BOM) costs vs. longer time to market and much higher R&D costs.

2. Buy-the-stack-on-board

You can buy a chip or module with the stack already developed and interface it to the microcontroller of the device.

A buy-the-stack-on-board option avoids the long lead time and R&D expense of the DIY approach. It can be accomplished with a single protocol embedded module. Such a module typically interfaces with the device’s native microcontroller via a serial or SPI connection. This does not avoid the hardware R&D expense as the device’s PCB needs to be redesigned to accommodate the module, but this is typically a relatively simple and straightforward modification.

The interface through the serial port is also relatively simple and is typically done using the serial Modbus RTU protocol. Many devices have support for this already developed within the device microcontroller, so software development is often minimal. This makes time to market much faster than the DIY approach with much reduced R&D expense.

In addition, these modules often have been pre-certified (depending on the protocols certification rules), which makes certification of the OEM device faster and less costly. An example of such a module is Grid Connect’s EtherNet/IP XPort. This module is a cost-effective and quick time-to-market approach to adding EtherNet/IP to a device.

Note that we are working on a next generation EtherNet/IP module that adds wireless capability.

3. Future-proof-module

Finally, you can buy a module that has multiple variants supporting a variety of Industrial fieldbus protocols where all versions of the module have the same footprint.

Building on the module approach, this is the multiprotocol module with a uniform footprint, allowing for multiple fieldbus / industrial networking protocols to be added to a device without redesigning the PCB. Simply plug in a module with the desired protocol and the device is multilingual. Additional accommodations may be needed if the chosen field buses have different physical interfaces, such as RJ45 for Industrial Ethernet protocols or a DB9 connector for a fieldbus such as PROFIBUS. With these module families, the device microcontroller interfaces through serial or SPI interfaces to the module just like with the previous approach.

Typically, however, no other modifications to the device’s software are needed when switching from one protocol module to another. So instead of designing to add one or two protocols, such as EtherNet/IP and PROFINET, suddenly all of the major protocols—like PROFIBUS, DeviceNet, and Modbus TCP, to name a few— are available with little to no additional cost, other than certification.

This approach makes sense when the volume is low, as the modules are typically more expensive than the other two approaches, or when maximum flexibility is needed.

Available EIP and PROFINET modules 

Grid Connect offers the Unigate IC module family from Deutschmann Automation, a German company that's been making network components for industrial data communication for over thirty years. As pre-certified communication interfaces, Unigate IC modules can be directly integrated into the electronics of the terminal device without changes in the firmware, which is important when the firmware has been certified. UNIGATE IC is an excellent alternative to developing your own interfaces. 

 

 

I hope we have answered some of your own questions about these popular industrial networking protocols. If not, please don't hesitate to contact us to discuss your questions or concerns.

Read More

New Product Alert: NET232+CC Serial to Ethernet Adapter With Cisco® RJ45 Console Port

Feb 12, 2015 3:08:04 PM / by Brittney Borowicz posted in Catalyst® 2350, Catalyst 6500 Series switches, Cisco, Cisco ASA 5500-X Series firewalls, Cisco® RJ45, COM ports, Comm Port Redirector software, Ethernet, Ethernet TCP/IP, GC-NET232-PLUS-CC, General, Hyperterminal, NET232+CC, ocal Ethernet network, Products, RJ45 console port, RS232 based RJ45 Serial port, Serial data rates, Serial to Ethernet, TCP connections, TTY console terminal, USB Port, USB to Barrel Jack

0 Comments

NET232CC_2_1500X1500

Part Number: GC-NET232-PLUS-CC
MPN: GC-NET232-PLUS-CC

YOUR PRICE:  $99.95

The NET232+CC is a serial to Ethernet device server, especially designed for use with equipment following the Cisco® RJ45 console port pinout. The NET232+CC provides remote access over Ethernet TCP/IP to routers, switches, servers, and other equipment that have a serial RJ45 console port or management port. Any Cisco equipment that uses the Cisco 72-3383-01 (DB-9 to RJ45) Console Cable can use the NET232+CC.

Examples of Cisco products that use this type of console port are the Catalyst® 2350 Series switches, Catalyst 6500 Series switches, and the Cisco ASA 5500-X Series firewalls. Other manufacturers use the same RJ45 pinout as the Cisco console port. For example, the IBM® Power 710, Power 730 and Power 8 Servers have a system port that can be used with the NET232+CC.

The NET232+CC is a fully featured device server supporting multiple TCP connections (up to 4 TCP or a mixture of TCP and UDP), DNS, email serial triggers, email authentication, and 256-bit AES encryption at no-additional charge. Serial data rates up to 921K and auto-sensing 10/100Mbps Ethernet are supported. The NET232+CC also features an industrial grade temperature range, detailed LED status indicators, and a factory reset button (accessible through a pin-hole with a paperclip)

The NET232+CC is simple to configure using the provided installation software and web page. Just connect the adapter to an RS232 based RJ45 Serial port and to the local Ethernet network and then run the free software to find and set up the NET232+CC. The NET232+CC is typically used to connect the console/management/system port over the network to a TTY console terminal program such as Hyperterminal. “Virtual” COM ports can also be created on a PC using the included Comm Port Redirector software.

The NET232+CC can be powered from a nearby USB Port by using the optional “USB to Barrel Jack” cable. This cable simply takes the 5VDC power from the USB Port to power the NET232+CC. Power can also be optionally provided by a wall supply (US 110V or Euro 220V).

Features:

  • Advanced RS232 Serial RJ45 to Ethernet (RJ45) Device Server
  • 10BASE-T and 100BASE-TX Ethernet (auto-sensing)
  • Serial baud rates up to 921K
  • Simple Web Page Configuration
  • Supports Multiple TCP Connections (up to 4) or a Mixture of TCP and UDP
  • Secure 256-bit AES Encryption and Email Authentication with User Name and Password
  • Email Serial Triggers (Supporting up to 6-byte Match Sequence or Embedded Modem Dial Commands)
  • Push Button Factory Default Reset
  • Industrial Temperature Range -40ºC to +85ºC
  • Powered by USB to Barrel Jack Cable or Wall Adapter
  • Compact Size (63.5 x 42.7 x 20.2 mm)
  • RS232 Serial Cable 15 inch with RJ45 Male Plug
  • UL, CE, RoHS Compliant

Screen Shot 2015-02-03 at 4.49.30 PM

 

> More Information

Read More

Subscribe to Email Updates

Lists by Topic

see all